1 Half Pint of KE215 Fisheye and Crater Eliminator

Our Custom Shop KE215-HP Fisheye Eliminator Additive prevents fisheyes and increases gloss. It reduces surface tension of the wet paint film improves flow-out, inhibits solvent trapping, and minimizes the telegraphing of sand scratches.

Our Kustom Shop Fisheye Eliminator eliminate fisheyes and other surface defects when using the latest enamels, acrylics, lacquers, and polyurethane paint systems.

• Prevents fisheyes
• Improves flow-out
• Increases gloss

FISHEYE FACTS:

Fisheyes are Silicone Contamination that cause Cratering. Small circular, crater-like openings that appear during or shortly after the spray application.

• Spraying over surfaces contaminated with oil, wax, silicone, grease, etc.
• Use of thinner/reducer in place of a solvent cleaner.
• Spraying over previously repaired areas containing "fisheye eliminator" additive.

• Remove wet paint film with solvent, clean and refinish.
• Add the recommended fisheye eliminator and respray the affected area.
• If fisheyes appear in a basecoat, allow the color to flash then spray a mist coat over affected area. Do not use fisheye eliminator in undercoats or basecoat color.
• If the paint has dried, sand to a smooth finish below the fisheye cratering and refinish.

• Thoroughly clean the surface to be painted with detergent and hot water, followed by the recommended solvent cleaner. Wipe dry with clean rags.
• Use fisheye eliminator that is specifically recommended for the topcoat.
• Install an air filtering system that removes and prevents oil and moisture contamination.
• Maintain air supply by draining, cleaning and changing filter(s) on a routine basis