Universal Urethane Clearcoat Kit, Standard Dry 4:1, S2088, 1 Gallon

Universal Urethane Clearcoat Kit, Standard Dry 4:1, S2088, 1 Gallon

by U-Pol
Item#: UPO 2882-KIT-STD
Rated 4.8 out of 5
Based on 4 reviews
Your everyday low price:
$109.99
Free Ground Shipping


USA OWNED & OPERATED
Since 1974

Details
  • High Solids Urethane Clear Coat with a 4 to 1 Mixing Ratio
  • Easy to apply with excellent flow and non-sag properties
  • Hardens rapidly to give a high build U.V resistant coating
  • Excellent gloss and long term durability
  • Can be air dried low baked or I.R. cured
Click to read more
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Weight: 12.0 lb

Overview

4.2 VOC High Solids Universal Urethane Clearcoat Kit with Standard (65 to 90F) Temperature Hardener

European Style Clearcoat with Nanoparticulate Technology - Ideal for overall use

Kit Includes:

  • 1 Gallon of U-POL UP2882 (4.2 VOC) High Solids Urethane Clearcoat
  • 1 Liter of U-POL UP2323 Standard Hardener (Makes 1 1/4 Sprayable Gallons = Aprox. 5 Liters)

NOTE: This Clearcoat meets the 4.2 National VOC Rule, but is not compliant for sale in California and Canada will not be sold in either California or Canada.

High Solids Urethane Clear Coat with a 4 to 1 Mixing Ratio

UP2882 is a HS two component acrylic urethane coating with Nanoparticulate technology which is the essential key in obtaining scratch resistant surfaces (SRC). Plus, it gives the clear a rubber-like elasticity as well as minimizing interaction between individual polymeric chains. Making UP2882 very resistant to rock chips, dust abrasion and normal weathering.

Features & Benefits:

  • Easy to apply with excellent flow and non-sag properties.
  • Hardens rapidly to give a high build U.V resistant coating.
  • Excellent gloss and long term durability.
  • Can be air dried, low baked or I.R. cured.
  • Can be easily polished once cured.

Nano Particulate Clear Features:

  • The SRC resins provide improved scratch and abrasion resistance
  • Deep wet-look gloss and transparency
  • 72 hour buff window
  • Barrier against gases, water and solvents
  • Increased weather resistance (acid rain)
  • Reduced shrinkage and heat reaction
  • Improved adhesion to ALL substrates
  • Better dirt resistance
  • HS ... Higher solids
  • Solvent and Waterborne compatible

Surface Preparation:

1. Degrease with wax and grease remover, UP2002, UP2012 or UP2023
2. Abrade the surface, Original cured paint Wet sand with P800-1000 Or dry sand with P600-800, then wipe again with degreaser
3. Remove dust and containments that may have settled with a tack cloth UP0430 or UP0431
4. Apply basecoat to the manufactures directions

Application:

1. Apply basecoat to the manufactures directions.
2. Apply two wet coats: Film build 1.5- 2.0 mil Conventional Gravity: 1.3mm -1.4mm 2 bar or 28-30 psi at gun Siphon: 1.3mm -1.4mm 2 bar or 28-30 psi at gun HVLP Gravity: 1.3mm -1.4mm 8-10 psi at gun
3. Allow 5-10 minutes flash between coats.
4. Dry Times at 68F
DUST FREE: 10-12 minutes depending on hardener selection
TACK FREE: 15-20 minutes depending on hardener selection
FORCE DRY: 20-40 minutes at 140F (60C)
INFRA RED: 15 minutes
BUFF TIME: After cool down from force dry or Minimum 6-8 hours air dry; maximum 72 hours

REPAIRING & RECOATING: may be recoated after a 5 Hour dry at 77F, or after a minimum 1 hour cool down after force drying at 140F for 30 minutes

POT LIFE: 4-6 hours :

1. Apply basecoat to the manufactures directions.
2. Apply two wet coats: Film build 1.5- 2.0 mil Conventional Gravity: 1.3mm -1.4mm 2 bar or 28-30 psi at gun Siphon: 1.3mm -1.4mm 2 bar or 28-30 psi at gun HVLP Gravity: 1.3mm -1.4mm 8-10 psi at gun
3. Allow 5-10 minutes flash between coats.
4. Dry Times at 68F
DUST FREE: 10-12 minutes depending on hardener selection
TACK FREE: 15-20 minutes depending on hardener selection
FORCE DRY: 20-40 minutes at 140F (60C)
INFRA RED: 15 minutes
BUFF TIME: After cool down from force dry or Minimum 6-8 hours air dry; maximum 72 hours
REPAIRING & RECOATING: may be recoated after a 5 Hour dry at 77F, or after a minimum 1 hour cool down after force drying at 140F for 30 minutes
POT LIFE: 4-6 hours

Additives:

Accelerator - If an accelerator is needed, use our Rocket (UP2000-UP0735) follow directions on use.

Fish Eye - The use of fish eye eliminator is strongly discouraged. If a fish eye additive is needed, use UP2001. Use no more than Necessary as it will directly affect the flow.

Painting Flexible Parts - An additive is not required for any flexible substrate

Blending - Dry edges can be blended in with Fade Out (UP2433).

Reviews

average rating 4.8 out of 5
Based on 4 reviews
  • 5 Stars
    3 Reviews
  • 4 Stars
    1 Review
  • 3 Stars
    0 Reviews
  • 2 Stars
    0 Reviews
  • 1 Star
    0 Reviews
100% of reviewers would recommend this product to a friend
4 Reviews
Reviewed by randall O.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

Great

Fast response fair price will buy again

Loading...
Was this helpful?
Reviewed by Matthew A.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

Very fast shipping!!

I am more than satisfied with the products I have purchased will be a returning customer!!

Loading...
Was this helpful?
Reviewed by Robin M.
Verified Buyer
I recommend this product
Rated 5 out of 5
Review posted

Universal Clear

Good product, great results.

Loading...
Was this helpful?
Reviewed by Rick C.
Verified Buyer
I recommend this product
Rated 4 out of 5
Review posted

Review from 50 year veteran shop owner

This clear applies easily and drys fast haft to hammer it on dont run easy for the price it a great product cant coment on life of product just tried it but does cut and buff easily

Loading...
Was this helpful?