• 4 Rolls(1 Sleeve) of 1-1/2"(18mm) 3M 233+ Green AUTOMOTIVE REFINISH MASKING TAPE PART# 26338-4 • • • •

Crepe Paper Backing Individually wrapped rolls Goes on quickly and easily Sticks at a touch and stays put

2 Rolls(1 Sleeve) of 3"(72mm) 3M 233+ Green AUTOMOTIVE REFINISH MASKING TAPE

Scotch Fine Line Striping Tape, 1 inch, 06314 (1 Roll)

3M 7447 SCOTCH-BRITE MARRON GENERAL PURPOSE ONE SINGAL PAD

3M Scotch-Brite General Purpose Maroon Hand Pads Part# 07447,1 Box of 20 PadsScotch-Brite General Purpose Pad Maroon - Surface Conditoning Pad for ...

Used on panel prior to clear coat blending. Does not rust like steel wool. This pad may be used with 3M Scuff-It Paint Prep Gel 06013 for improved ...

Scotch-Brite Roloc Clean and Strip Disc, Extra Coarse, 4 in. x 1/2 in, 07466 (1/Pack)

Scotch-Brite Roloc Coating Removal Disc TR with Adapter, Coarse grit, 3 in, 07461

Scotch-Brite Roloc Surface Conditioning Disc, Coarse grit, 3 in, 07485 (25/Pack)

Single - 3M Gray Scuff Pad 1 Each - Gray Scotch-Brite

3M Scotch-Brite Ultra Fine Hand Pads Part# 07448, 1 Box of 20 Pads Scuffing before and after applying primer-surfacer, and prior to clear ...

ScotchBlue 2090 Painters Masking Tape for Multi-Surfaces, 1 in. x 60 yd, 09171 (1 Roll)

3M 7191 Disposable P95 Half Mask Respirator - Small

CRL 3M Black Strip-Calk Bedding and Glazing Compound - Box

What do you do when it comes time to replace factory installed sound deadening pads typically found on the floor pan, side panels, and outer door p...

Psa Backing Pads - Abrasive Discs Type: Stikit PSA Abrasive Disc Pads Diameter: 5 Shank Diameter: 3/4

For use with all grades of 6 inch diameter Stikit discs, these pads are firm yet conformable and lightweight. Makes corner and contour sanding easier.

A Weight Paper Backing Abrasive Mineral: Aluminum Oxide Sanding Surface: Clear Coat, Fiberglass, Paint, Plastic, Primer, Putty Suggested backup pa...

Use for for rough featheredging. Could be used for final sanding of plastic filler and putty. 3M™ Stikit™ Gold Sheets in Roll Form. Coated abr...

Use for for rough feather edging. Could be used for final sanding of plastic filler and putty. 3M™ Stikit™ Gold Sheets in Roll Form. Coated ab...

Use for for rough featheredging. Could be used for final sanding of plastic filler and putty. 3M™ Stikit™ Gold Sheets in Roll Form. Coated abr...

Use for for rough featheredging. Could be used for final sanding of plastic filler and putty. 3M™ Stikit™ Gold Sheets in Roll Form. Coated abr...

Use for fine featheredging or last final sanding step before priming. 3M™ Stikit™ Gold Sheets in Roll Form. Coated abrasive rolls with a press...