- Single Action
- Tab 2
How to Clean:
Single Action Siphon Feed
When removing parts, set aside in order, from right to left and refer to the Parts diagram when re-assembling your airbrush
Using a spanner wrench, pry off the safety clip.
Remove the Locking clip and set aside.
While unscrewing, push the fluid nozzle down to slightly unsnap the brass needle.
The needle has a flat notch that lines up with the flat notch on the Airbrush body.
Remove the brass airbrush needle then set aside.
Unscrew the air cap at the tip of the airbrush and set aside.
Clean the air cap using the cleaning brushes and airbrush cleaner.
Using the fine cleaning brush and clean the inside and outside of the needle.
Clean the fluid nozzle using a medium size airbrush cleaning brush.