2.1 VOC Compliant Water Clearcoat 4:1, S2087V, 1 Gallon

2.1 VOC Compliant Water Clearcoat 4:1, S2087V, 1 Gallon

by U-Pol
Item#: UPO 2872V
Your everyday low price:
$95.64


USA OWNED & OPERATED
Since 1974

Details
  • Can be used overall and spot repairs by changing hardener speeds
  • Durable UV resistant with optimum gloss retention
  • 2.1 lb/gal VOC Compliant when used with S2037 S2038 & S2039 hardeners
Click to read more
WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For more information, go to www.P65Warnings.ca.gov.

Weight: 10.0 lb

Overview

2.1 VOC Medium Solids Compliant Clearcoat

Medium Solids Urethane Clear Coat with a 4 to 1 Mixing Ratio

U-POL UP2872V is a Water Clear, Ultra-High Gloss Coating, which can be used for overall and spot repairs by changing hardener speeds.

Features & Benefits:

  • Medium solids two component acrylic urethane coating.
  • Can be applied undiluted or reduced up to 10% with UP2481 or UP2842 VOC compliant reducer.
  • Has good flow and non-sag properties.
  • Hardens rapidly to give a high build U.V resistant coating.
  • Has excellent gloss and long term durability.
  • Can be air dried, low baked or I.R. cured.
  • Can be easily polished once cured.
  • Dust free in 3-5 minutes.

Surface Preparation:

Step 1: Degrease with Wax and Grease Remover, UP2002, UP2012, UP2022 or UP2023, allow to dry.
Step 2: Abrade the surface Original cured paint: Wet sand P800-1000 or Dry sand P600-800 then degrease with System 20 Wax and Grease Remover, UP2002, UP2012, UP2022 or UP2023.
Step 3: Remove all dust/dirt particles with a U-POL tack rag, UP0430 or UP0431.
Step 4: Apply basecoat to the manufacturers directions.

VOC information: 2.1 lb/gallon ready to use. Ready to use solids: 33.5%

U-POL UP2872V is a System 20 Clearcoat that is in the S2037 Series.

Product Technical Information

  • Mixing Ratio: 4:1
  • Spray Tip: 1.3 to 1.8
  • Viscosity/ sec 2# Zahn: 12-15
  • Air Pressure HVLP at cap /psi: 8-10
  • Solids % RTS: 43
  • Coats: 2-3 wet
  • Build/mil: 1.5-2.0
  • Flash Between Coats/min: 5-10
  • Dust Free Time/mins: 3-5
  • FORCE DRY
  • Purge at 72�F/mins: 15
  • Dry at 140�F/mins: 30
  • AIR DRY at 72�F/hours: 5 to 8

Reviews