2.1 VOC Medium Solids Compliant Clearcoat Kit with Standard (60 to 95F) Temperature Hardener

European Style Clearcoat - Ideal for overall use

Kit Includes:

• 1 Gallon of U-POL UP2872V (2.1 VOC) Medium Solids Urethane Clearcoat
• 1 Liter of U-POL UP2392 Standard Hardener (Makes 1-1/4 Sprayable Gallons = Aprox. 5 Liters)

Medium Solids Urethane Clear Coat with a 4 to 1 Mixing Ratio

U-POL UP2872V is a Water Clear, Ultra-High Gloss Coating, which can be used for overall and spot repairs by changing hardener speeds.

Features & Benefits:

• Medium solids two component acrylic urethane coating.
• Can be applied undiluted or reduced up to 10% with UP2481 or UP2842 VOC compliant reducer.
• Has good flow and non-sag properties.
• Hardens rapidly to give a high build U.V resistant coating.
• Has excellent gloss and long term durability.
• Can be air dried, low baked or I.R. cured.
• Can be easily polished once cured.
• Dust free in 3-5 minutes.

Surface Preparation:

Step 1: Degrease with Wax and Grease Remover, UP2002, UP2012, UP2022 or UP2023, allow to dry.
Step 2: Abrade the surface Original cured paint: Wet sand P800-1000 or Dry sand P600-800 then degrease with System 20 Wax and Grease Remover, UP2002, UP2012, UP2022 or UP2023.
Step 3: Remove all dust/dirt particles with a U-POL tack rag, UP0430 or UP0431.
Step 4: Apply basecoat to the manufacturers directions.

VOC information: 2.1 lb/gallon ready to use. Ready to use solids: 33.5%

U-POL UP2872V is a System 20 Clearcoat that is in the S2037 Series.

Product Technical Information

• Mixing Ratio: 4:1
• Spray Tip: 1.3 to 1.8
• Viscosity/ sec 2# Zahn: 12-15
• Air Pressure HVLP at cap /psi: 8-10
• Solids % RTS: 43
• Coats: 2-3 wet
• Build/mil: 1.5-2.0
• Flash Between Coats/min: 5-10
• Dust Free Time/mins: 3-5
• FORCE DRY
• Purge at 72F/mins: 15
• Dry at 140F/mins: 30
• AIR DRY at 72F/hours: 5 to 8